Alloy milling cutter manufacturers talk about the common types of milling cutter

The excellent performance of alloy milling cutter comes from the high quality and ultrafine particle carbide matrix, the tool wear resistance and cutting edge strength are perfectly combined. Strict and scientific groove control makes the cutting and chip removal more stable. In the process of cavity milling, the structure of shrinking neck and the design of short edge not only ensure the rigidity of the tool, but also avoid the danger of interference. The application of alloy milling cutter will be expanded with the continuous refinement of the process.

The common types of milling cutters can be summarized as follows

1, face milling cutter, the main cutting edge of the face milling cutter is distributed on the cylindrical surface of the milling cutter or on the conical surface of the circular machine tool, and the secondary cutting edge is distributed on the end face of the milling cutter. Face milling cutter according to the structure can be divided into integral face milling cutter, carbide integral welding face milling cutter, carbide machine clamp welding face milling cutter, carbide indexable face milling cutter and other forms.

2, keyway milling cutter, machining keyway, each time along the milling cutter axial feed small amount, and then along the radial feed, so repeated many times, that is, the machine tool electrical equipment can complete the keyway processing. Because the wear of the milling cutter is on the end face and the outer part near the end face, only the end face cutting edge is trimmed during grinding, so that the diameter of the milling cutter can remain unchanged, so that the machining precision of the keyway is higher and the service life of the milling cutter is longer. The keyway milling cutter has a diameter range of 2 -- 63mm, with a straight shank and a Muzzle taper shank.

3, end milling cutter, waveform edge end milling cutter. The difference between a wavy edge end mill and an ordinary end mill is that its blade is wavy. The use of this end mill can effectively reduce cutting resistance, prevent vibration during milling, and significantly improve milling efficiency. It can change the long thin chip into the thick and short chip, so that the chip removal is smooth. Because the blade is waveform, so that it and the workpiece to be processed contact cutting edge length is short, the tool is not easy to produce vibration.

4, Angle milling cutter, Angle milling cutter is mainly used for horizontal milling machine processing of various Angle slots, bevels and so on. The material of Angle milling cutter is usually high speed steel. Angle machine tool electrical milling cutter according to its shape, can be divided into single Angle milling cutter, asymmetric double Angle milling cutter and symmetrical double Angle milling cutter three. Angle milling cutter tooth strength is small, milling, should choose the appropriate cutting dosage, prevent vibration and edge collapse.

Alloy milling cutter has high hardness, high wear resistance, high hardness, high thermal stability and oxidation resistance. Suitable for all kinds of high speed cutting tools, all kinds of high temperature working wear-resistant parts, such as hot drawing die. YT5 tool is suitable for rough steel, YT15 for finish steel and YT for semi-finish steel.